Eccs E0824, Руководство пользователя

Страница: 80 / 100

79
-
EMERGENCY : turn on/off Emergency record function.
-
EVENT : pop up a window to see System Log.
-
PIP : turn on/off PIP screen in case of 1 channel screen. If PIP function is on, user number key(s) + ENT key to
change the PIP channel. In case of 4 or 9 channel screen, it changes the screen to a next one in the sequence.
-
FREEZ : freeze a current image.
-
SETUP : pop up Setup window.
-
PLAY/PAUSE : play/pause recorded data in play mode.
-
SEARCH : pop up Search window, or switches play mode to search mode.
-
ZOOM : zoom in a current image.
-
JOYSTICK (REW) : rewind in sequence of 2X, 4X, 8X, 16X, 32X, 62X, Extreme in play mode.
-
JOYSTICK (FF) : fast forward in sequence of 2X, 4X, 8X, 16X, 32X, 62X, Extreme in play mode.
-
JOYSTICK(SETUP) : operate with direction keys if Setup window is popped up. (up/down/left/right)
-
ENT : view a channel in full screen (by selecting a number with ENTER button).
11.4.3 PTZ Control Mode
y
Push once to exit DVR mode and turn PTZ mode.
y Press number keys + “ENT”(Hold for a while until double beep sounds) key to change to Camera ID that wish to control. If
there is a corresponding Camera ID, a full camera image will show up and PTZ control is possible.
y
It is able to control 255 devices.
y
PSET : Preset save – Number keys + PSET (Hold for a while until double beep sounds)
Preset shift – Number keys + PSET
y
Joystick : PAN/TILT, Zoom In, Zoom Out
y
TELE : Zoom Out
y WIDE : Zoom In
(Note)
When a Key does not Work after Set up
y
If the communication speed of DVR and CP are not co-related, it may not work.
Please make sure the Baud rate of Keyboard sets on 9.6kbps.
y
Press the button to enter PTZ mode and switch to DVR mode again.
y
Please reboot the DVR.
When Tx Blinks Continually on the LED Window
y If Tx blinks continually without any operation, it may be mistakenly set up for Joystick.
-
OFFSET of the Joystick may not appropriately set up.
-
Please touch the Joystick and position it on the center.