Eccs E0824, Руководство пользователя

Страница: 13 / 100

12
y
Put the clip pin into the switch hole on the monitor (Live) screen and keep pressing until you feel the switch has clicked.
2.2.10 Power Supply Connections
y
A Type
: Plug the power supply adapter (DC 12V, 5A) which include in this product to ’ DC12V ’ connector and plug another
side to power source. Adapter input voltage is a free volt (100 VAC ~ 240 VAC). Please do not use any different power
supply adapter because it may cause the DVR to malfunction.
y
B Type
: Plug the power supply adapter (DC 12V, 6.67A) which include in this product to ’ DC12V ’ connector and plug
another side to power source. Adapter input voltage is a free volt (100 VAC ~ 240 VAC). Please do not use any different
power supply adapter because it may cause the DVR to malfunction.
2.2.11 Connections Guideline
y
Video Out Connector: If only the monitor is connected to VIDEO OUT connector, please set the impedance switch on the
rear side of the monitor to 75 ohms to prevent abnormally bright or collapsed images. If you want to connect another device
(e.g., a recorder) to the back of the monitor, please set the impedance switch on the rear side of the monitor to HIGH Z
(High Impedance) and set the last device to 75 ohms.
y Alarm Input Connector: Do not input any type of voltage to the AI 1~AI 4 (AI 16) connectors.
CAUTION
PRESS FACTORY RESET SWITCH ONLY IN LIVE MODE. NEVER PRESS IN SETUP MODE.