Eccotemp EP-2.4, Инструкция по установке и эксплуатации

Страница: 7 / 10

F. Applications
Point of Use Models
Point of Use Models are designed to be connected to the COLD water line near the desired point of use
needing hot water. Unit must be properly sized to provide sufficient hot water for the desired number
of fixtures to be served. Contact your dealer or Eccotemp sales representative for assistance in sizing
for your application.
Point of Use Models can also be connected to the HOT water line at the point of use to provide hot
water sooner than is possible from the main hot water source located in a central location a longer dis-
tance from the fixture. As all Eccotemp models are temperature rather than flow controlled, the POU
unit will modulate and add only the amount of energy necessary to maintain the hot water set point
and return to standby once hot water arrives from the primary hot water source. This offers energy
AND water savings over other alternatives such as recirculation.