
580/03.05.23/V2
P a g e |
19
of 29
Ecco Stove | Foster House | 2 Redditch Road | Studley | B80 7AX | United Kingdom
T
| +44 (0) 1527 857 814
E
W
| www.eccostove.com
For all patents
–
See Addendum
Upper catalytic baffle viewed from below NOTE: the angle points down and the baffle
with lower baffle removed. touches the stoves top when fitted.
The lower horizontal baffle boards tapered edge must be facing up (sharp edge up) and
to the front and set against the back board without any gap at the rear. The upper
baffle board containing the cast in catalysers fits with the tapered edge facing up (sharp
edge against the underside of the doors frame) located over the middle level 4 pins
using the two rear indents to locate the baffle.
Locate the Silicon Carbide baffle block in to place over the inner side cheeks and located
with the 4 indents onto the 4 pins and ensuring the adhered on tape is to the back and
dresses over the back panel of the stove to form a seal.
i)
Lower Top Add diablos to locate this next section.
Lay on the lower top over the baffle block and
between the sides and back.
j)
Top plate slide the final top section over the side
tapers
–
ensuring the flue holes line up.
The stoves sides should be pulled in by the
tapered side edges however a gentle bump on
the stoves corner beneath the top plate will help
to settle the parts in.
a)