ECCO STOVE 580EC2, Руководство пользователя, Страница: 15 / 29

580/03.05.23/V2
P a g e | 15 of 29
Ecco Stove | Foster House | 2 Redditch Road | Studley | B80 7AX | United Kingdom
T | +44 (0) 1527 857 814 E | sales@eccostove.com W | www.eccostove.com
For all patents – See Addendum
Cleaning the catalysers
Remove the lower baffle by removing
the 4 pins. Lower down onto the grate.
Remove the upper baffle by removing
the 4 pins lower down on grate. The
catalysers can be vacuumed in place or
lifted out and vacuumed to ensure the
dust entrapped is removed. Replace
the catalysers into their space in the
baffle brick and refit in reverse
ensuring the 25mm rope is place both
above the air box at the back and
25mm rope above the baffle front top.
THE CATALYSERS WILL ENTRAP DUST AND UNDERHEAVY USE MAY REQUIRE INSPECTION AND
CLEANING MONTHLY. This will be evidenced by performance or smoking back.
The catalyser will need replacing after two years or earlier dependent on usage and witnessed
by a breakdown of the cells within which will appear distorted and closed.
The catalyser will gather dust and needs checking / cleaning monthly
Each month or so remove the pins and lower the underside baffle; vacuum the catalytic
honeycomb (catalyser) carefully and rehinge baffle and re-pin into place by fitting the pins
beneath the curved edge of the baffle into the door frame.
20. FINISHES
a)
SILICON CARBIDE – needs only a light dusting down – as it is a natural finish
discrepancies in overall effect or colours are to be expected.
b) PAINT FINISHES
The heat resistant paint used to colour/finish your Ecco Stove 580EC
2
will give off a
noxious smell for a number of initial firings as the heat from the stove “cures” the paint
in place.
If and when this occurs, open doors and windows in the room to ventilate the “factory
like” odour
but avoid refuelling the stove until the smell has dissipated.
If the finish becomes dirty to the colour changes over time (heat resistant paint finishes
do change with heat intensity which is normal) the Ecco Stoves paint can be “touched
up” but only when cold, by using a paint supplied by the manufacturer or retailer.
Never respray the stove body when the stove is in fired use or hot.