1 2
P
P
P
P
N
1 3
P
P
P
P
0 1 2 3 4 5
P
P
P
P
1 4
W
W
W
W
12. How to CHECK the GSM reception level in the area by SMS command
The unit will send SMS replay with the GSM reception level of the unit in the area by the following SMS command:
The unit will reply to the sender with SMS message:
“The reception level is X “
The letter “ X” represents a number from “ 0 “ to “ 5 “ .
13. OPEN TO ALL command
The unit can be programmed so that it will open the gate to ANY incoming call (without checking if the caller is
authorized user). You can activate or cancel this function by SMS command as follows:
PPPP
represent the 4 digit PASSWORD.
The unit will reply by the following SMS to the sender:
When the OPEN TO ALL is activated, the system will send SMS saying:
Open to all is activated.
When the OPEN TO ALL is cancelled, the system will send SMS saying:
Open to all is cancelled.
14. How to change the PASSWORD
The factory default password is 9999.
You can change the password by sending the following SMS message:
The letters
P P P P
represent the old password
The letters
W W W W
represent the new password.
The unit will confirm by SMS replay: “
The new password is X X X X”
The letters X X X represent the new password.
15. How to set the system to factory default settings.
To set the unit to “Factory Default Settings” means the unit will delete all the phone numbers, rest all the functions
to factory default parameters as was supplied initially.
To do set the unit to Factory Default you need to send the following SMS command:
PPPP represent the four digits password.
The unit will reply by SMS back that says: “
THIS IS A WARNING
.
Do you wish to DEFAULT the system?
“
You should confirm within 2 minutes by sending SMS message that says YES if you wish to proceed, otherwise,
the system will ignore this command and do nothing.
If confirmed, then the unit will send back SMS that says: “
The unit was set to ECA Factory Default
”.
All Rights Reserved to
ECA
Electronic Engineering Pty LTD.
