EC Line BT-8500, Руководство пользователя

Страница: 7 / 80

4
3. Installation
3.1 Unpacking
1) Take the device and accessories out of the box.
2) Remove the packing material.
3) Check the standard shipment packing list to
make sure you have received all of the items
ordered.
 Wireless Linear Imager Scanner
 Bluetooth Cradle or Charger (optional)
 Power Adaptor (if applied)
 Communication Cable
 Skip resistant pad
 Iron panel of cradle and screw
 Product Compact Disc
4) Visually inspect the device and accessories for
any evidence of physical damage.
5) If anything is missing or appears to be damaged,
immediately contact your dealer.
ATTENTION:
Store the packing material and boxes: It should
be used whenever the device is transported for
servicing.
3.2 Mounting
Once you have unpacked all components, you can
start installing the device as below steps:
BT-8500 Scanner
1) The Scanner must be charged for a minimum of
8 hours before the scanner can be placed in full
operation for the first time.
2) The cradle will indicate in red light when the
scanner is being charged.
3) Once the battery is fully charged, the green LED
of scanner will be on. The green light will be off
when the scanner leaving from cradle. When the
battery is over charged, the red and green LED
will be flashing.
4) If the battery power capacity is too low, the