EC Line BT-8500, Руководство пользователя

Страница: 12 / 80

9
4.5 Sleep Mode
The BT-8500 scanner enters sleep mode to save
battery energy, when the BT-8500 scanner is used for
1 minute or 10 minutes. During sleep mode all the
functions and connection will be halted. After press
the trigger button the scanner will wake up and
reconnect the communication with the cradle or
Bluetooth device.
4.6 Batch Mode
This batch mode is enabled when you have scanned
“Batch Mode On”. The scanned data is stored in the
memory of the BT-8500 instead of being transmitted.
You can delete the last scanned barcode data by
scanning “Delete Last Data” barcode. This function is
disabled when you scan “Batch Mode Off”.
When scan barcode “Batch Data Output”, the stored
scanned data will be immediately transmitted to the
host. When scan barcode “Batch Data Clear”, all
stored scanned data will be erased from memory.
The capacity of this memory depends on the scanned
data. The memory size is approximately 30,000 sets
of EAN13 barcode type.
4.7 Out of Range
When “Out of Range” function is enabled, and the
scanner is working at out of transmission range, the
scanned data will be stored to out-of-range memory.
Memory size is approximately 25,000 sets of EAN13
barcode type. The all stored data will be transmitted to
device when the link is reconnected, and the all data
stored in out-of-range memory will be cleared.