Chengdu Ebyte Electronic Technology Co.,Ltd.
E106-xxxTxxS User Manual
Copyright ©2012–2023
，
Chengdu Ebyte Electronic Technology Co.,Ltd.
4
1 Overview
1.1 Introduction
E610-xxx T xx S product is a high-speed continuous transmission wireless digital transmission module developed
by Eite, with built-in high performance single chip microcomputer and wireless transceiver chip. The work was
performed in 410-441 MHz band, 850-870 MHz band and 902-928 MHz band, with a transmission power of 20-30 dBm.
The main function is that when the module is in the continuous transmission mode, it can perform continuous
uninterrupted transmission under different serial port wave rates, and the data output delay at the receiving end is low,
which is suitable for the rapid transmission of large data volume scenarios, such as high-speed sensing, mapping
measurement and control, remote sensing positioning and so on.
Figure 1: E610-433T20S
Figure 2: E610-433T30S
Figure 1: E610-900T20S
Figure 2: E610-900T30S
1.2 Features
In general mode, automatic relay network is supported, multi-level relay is suitable for ultra-long distance
communication, and multiple networks in the same area run at the same time;
Support users to set the communication key, and can not be read, greatly improve the confidentiality of user data;
Support RSSI signal strength indication function for assessing signal quality, improving communication network
and ranging;
Support wireless parameter configuration, through wireless sending command packet, remote configuration or
reading wireless module parameters;
Support fixed-point transmission, broadcast transmission, and channel monitoring;
Support deep dormancy, the power consumption of the whole machine is about 2 uA;
Support the global license free ISM 433MHz band and 868 MHz / 915 MHz band;
