Ebyte E610 T S Series, Руководство по эксплуатации продукта

Страница: 28 / 33

Chengdu Ebyte Electronic Technology Co.,Ltd. E106-xxxTxxS User Manual
Copyright ©2012–2023
，
Chengdu Ebyte Electronic Technology Co.,Ltd. 27
12 FAQ
12.1 Communication range is too short

When there is a linear communication obstacle, the communication distance will decay accordingly;

Temperature, humidity, the same frequency interference, will lead to the communication packet loss rate increased;

Ground absorption, reflection of radio waves, close to the ground test effect is poor;

Seawater has a strong ability to absorb radio waves, so the seaside test effect is poor;

There are metal objects near the antenna, or placed in the metal shell, the signal attenuation will be very serious;

Power register setting is wrong, the air rate setting is too high (the higher the air rate, the closer the distance);

At room temperature, the low voltage of the power supply is lower than the recommended value, and the lower the
voltage, the lower the power generation;

The antenna is poor to match the module or the quality of the antenna itself.
12.2 Module is easy to damage

Please check the power supply to ensure that between the recommended supply voltage, exceeding the maximum
value will cause permanent damage to the module;

Please check the stability of the power supply, and the voltage cannot fluctuate substantially and frequently;

Please ensure anti-static operation during installation and use process and static sensitivity of high frequency
devices;

Please ensure that the humidity should not be too high, and some components are humidity sensitive devices;

If there is no special demand, it is not recommended to use it at too high or too low temperature.
12.3 BER(Bit Error Rate) is high

There is the same frequency signal interference nearby, stay away from the interference source or modify the
frequency, channel to avoid interference;

The power supply is not ideal may also cause disorderly code, be sure to ensure the reliability of the power supply;

Extension line, feeder quality is poor or too long, will also cause high bit error rate.