Chengdu Ebyte Electronic Technology Co.,Ltd.
E106-xxxTxxS User Manual
Copyright ©2012–2023
，
Chengdu Ebyte Electronic Technology Co.,Ltd.
18
7 Register read/write control
7.1 Command format
Under the configuration mode (mode 2: M1=1, M0=0), the supported instruction list is as follows (when setting,
only 9600,8N1 format is supported):
No
Command format
Instruction
1
Set the register
Instructions: C0 + starting a parameter
Response: C1 + starting a parameter
Example 1: The configuration channel is 0x09
Command start address length parameter
Send to: C0 05 01 09
Return: C1 05 01 09
Example 2: simultaneously configure the module address (0x1234), network address
(0x00), serial port (9600 8N1), empty speed (1.2K)
Send to: C0 00 04 12 34 00 61
Return: C1 00 04 12 34 00 61
2
Read the register
Instructions: C1 + starting a length
Response: C1 + starting a parameter
Example 1: Read the access channel
Command start address length parameter
Send to: C1 05 01
Return: C1 05 01 09
Example 2: Read the module address, network address, serial port, and empty speed
simultaneously
Send to: C1 00 04
Return: C1 00 04 12 34 00 61
3
Set up the temporary
register
Instructions: C2 + starting a parameter
Response: C1 + starting a parameter
Example 1: The configuration channel is 0x09
Command start address length parameter
Send to: C2 05 01 09
Return: C1 05 01 09
Example 2: simultaneously configure the module address (0x1234), network address
(0x00), serial port (9600 8N1), empty speed (1.2K)
Send to: C2 00 04 12 34 00 61
Return: C1 00 04 12 34 00 61
5
Wireless configuration
Instruction: CF CF + General instruction
Response: CF CF + conventional response
Example 1: The wireless configuration channel is 0x09
Wireless command header command starting address length parameter
Send to: CF CF C0 05 01 09
Return: CF CF C1 05 01 09
Example 2: wireless simultaneous configuration module address (0x1234), network
address (0x00), serial port (9600), empty speed (1.5K)
