Ebyte E104-BT5011A, Руководство пользователя

Страница: 37 / 49

Copyright ©2012–2019
，成都亿佰特电子科技有限公司
32
the authentication is successful;
Chart 7 4 Aerial configuration certification chart

Configure the module according to the instructions shown in the 6.4 instruction list;
7.2 Data transmission
For data transmission related instructions, see 5.3 Data Transmission Mode.

Test Conditions:

Configure one module as the master and one as the slave as described in the 7.1 Configuration Mode Quick Use
Guide;

Test software: SSCOM.

Other parameters are the default configuration.
7.2.1 Data transparent transmission
1. Power on the module. Enable logmsg printing for master and slave (at+logmsg=1);
2. Print "STA:connected" after successful connection. The LINK pin is low. (As shown in Figure 7: 5 data transparent
transmission diagram)
3. The master sends the data "0123456789" to the slave, and the slave receives the data as "0123456789" (as shown in
Figure 7: 5 data transparent transmission diagram);