Ebyte CC2541, Руководство пользователя

Страница: 27 / 31

Ebyte Electronic Technology Co., Ltd E104-BT01 Usermanual
Copyright ©2012–2019 ， Ebyte Electronic Technology Co., Ltd
26
7.2 Program burning
No. Item Notes
1
Program
burning
Module embedded with 8051 MUC, please use our CC-DeBugger to download the program (click
to open the link), cannot use the serial port or any other tools, such as JTAG, ISP, ICP.
Users can modify their own functions based on the official TI BLE protocol stack .
They can also download the compiled HEX file directly,
2
Test board None.
8. FAQ
8.1 Communication range is too short

The communication distance will be affected when obstacle exists;
 Data lose rate will be affected by temperature, humidity and co-channel interference;
 The ground will absorb and reflect wireless radio wave, so the performance will be poor when testing near ground;
 Sea water has great ability in absorbing wireless radio wave, so performance will be poor when testing near the sea;
 The signal will be affected when the antenna is near metal object or put in a metal case;
 Power register was set incorrectly, air data rate is set as too high (the higher the air data rate, the shorter the distance);
 The power supply low voltage under room temperature is lower than 2.5V, the lower the voltage, the lower the
transmitting power;

Due to antenna quality or poor matching between antenna and module.
8.2 Module is easy to damage
 Please check the power supply source, ensure it is 2.0V~3.6V, voltage higher than 3.6V will damage the module;
 Please check the stability of power source, the voltage cannot fluctuate too much;
 Please make sure antistatic measure are taken when installing and using, high frequency devices have electrostatic
susceptibility;
 Please ensure the humidity is within limited range, some parts are sensitive to humidity;

Please avoid using modules under too high or too low temperature.
8.3 BER(Bit Error Rate) is high
 There are co-channel signal interference nearby, please be away from interference sources or modify