Ebyte Electronic Technology Co., Ltd E104-BT01 Usermanual
Copyright ©2012–2019
，
Ebyte Electronic Technology Co., Ltd
11
4.7 Status or event printing
Status printing can be used to feedback module working status or events in real time, and send information out through
the serial port, as shown in the following table:
Note:
1.
You can use the command AT+LOGMSG to control whether to enable or disable this function.
2.
Status information includes: connection, disconnection, wake-up, sleep, configuration mode, transmission mode.
4.8 Factory parameter setting
The module can be restored to factory settings by the command AT+RESTORE. After the factory settings are restored,
the module will automatically reset. The factory parameters are shown in the table below:
Common
parameter
Baud rate
19200bps
Stop bit
1
Air configuration password
123456
Data output delay
On
Bluetooth binding
Off
MAC binding address
00 00 00 00 00 00
TX power
0dbm
Working mode
Wake-up mode
Low power after disconnection
Off
Role
Slave
Status printing
Off
Minimum connection interval
10 ms
M aximum connection interval
10 ms
Connection timed out
5 s
IO2(P0_6)
Low level
IO3(P0_7)
Low level
Slave
Broadcast function
Normal broadcast on
Module name
E104-BT01
Broadcast interval
1 s
Status
Information
Connection succeeded
\r\n STA:connect\r\n
Disconnection
\r\n STA:disconnect\r\n
System wake-up
\r\n STA:wakeup\r\n
Sleep mode
\r\n STA:sleep\r\n
Configuration mode
\r\n STA:config\r\n
Transmission mode
\r\n STA:transmit\r\n
Содержание CC2541
Страница 1: ...E104 BT01 CC2541 2 4GHz BLE 4 0 module ...
