WX2NB Manual v.1.0
Page 34 / 40
6.8.
DEVICE MONITOR
“Device Monitor” provides real-time information about device state. To use this
function device must be connected to PC computer with GD-PROG cable (using
DEBUG mode). Correct RS232 port must be chosen in “Port” field. “Device monitor”
provides following information:
DC power indication
Wi-Fi network signal level indication
Bit-Error-Rate level measuring
Inputs and output state monitoring
Type or serial number of device
Firmware and hardware revision
Device time
These parameters are also shown in LOG window in text style. All data can be saved
to file.
6.9.
EVENTS HISTORY
„Events history” provides information about last events stored in WX device
memory. WX transmitter is able to save about 5000 events. It is possible to read
the history of both using a Wi-Fi connection and RS232. In the second case data
can be send to PC only via GD-PROG cable (in data mode). Correct RS232 port
or GPRS connection must be chosen in “Choose connection kind” field. After
providing Service code and clicking “Open” button events data will be
downloaded from WX memory. After properly reading access to features such as
the "Filtering" and "Charts" becomes possible. Both of them may be used to
quickly diagnose the device
.