LX2NB Manual v.1.3
Page 51 / 57
(and transmits) information exclusively from devices saved in data base, the first
operation during remote programming is proper registration of the device. This
procedure has been described in OSM.2007 Operation Manual.
8.2.1.
The first programming of device
As the device does not have defined access parameters in respect of GPRS network
and OSM-2007, programming shall be begun with providing parameters.
Irrespectively of providing these parameters the first operation shall be registration
of device in OSM-2007data base.
Before remote programming user shall check that the device is furnished with SIM
card (with reservations provided in chapter
7.1.5.3
) and is connected to power
supply. User shall know serial number of device and phone number for SIM card.
Follow the procedure:
a)
With the use of OSM-2007 console position cursor on proper device in “Devices”
tab.
b)
Click “Config.” option and then select “Set Configuration” function to display lit of
parameters.
c)
Enter server address, server port and APN. Click OK and system shall send to
device provided parameters (SMS).
d)
Wait till device addresses server (in “Devices” tab it will be marked with green
colour).
e)
Launch software and define options of device (description is provided in chapter
7 of this Manual).
f)
Select “Send” to display a new window and select remote connection (GPRS tab).
Save settings in memory of device. Saving course is displayed on special
window.
g)
After saving completion close configuration wizard.
h)
The device is ready to transmit data.
8.2.2.
Reprogramming of device
As the device has defined access parameters in respect of GPRS network and OSM-
2007, it is possible to program device at any time.
If device is installed in secured object and is furnished with SIM card and connected
to power supply follow the procedure:
a)
Launch configuration wizard and define options of device (description is provided
in chapter 7 of this Manual).
b)
Select “Send” to display a new window and select remote connection (GPRS tab).
Save settings in memory of device. Saving course is displayed in special window.
c)
After saving completion close configuration wizard
d)
The device is ready to transmit data according to new settings.
Содержание LX2NB
Страница 49: ...LX2NB Manual v 1 3 Page 49 57...