LX2NB Manual v.1.3
Page 20 / 57
6.3.8.
Operations->Read
Function reads data saved in memory of GPRS module. Exchange of data follows on
port selected in section “Select Connection Type” (See below description of option
”Configuration”). Correct reading is confirmed with message on a screen. Data
downloaded from device may be saved on file (see clause
6.3.3
) and use for other
devices.
To use this function it is necessary to define type and parameters of connection.
E.g. for local connection the following view is displayed:
where:
Connection kind - serial port to which module is connected
Access code- service code of transmitter
Detailed description of connections configuration is included in clause
6.3.5
.
6.3.9.
Operations->Send
This function is analogical to the above one, at the same time it enables data saving
into EEPROM module. There is also possibility to set correct time into LX device.
Correct saving is confirmed with message on a screen.
6.3.10.
Operations->Restore default settings
If operation “Read” finishes with error message (e.g. if access code is unknown) it is
possible to come back to default settings by selecting “Restore default settings”. e
“Do you want to overwrite current configuration with default values?”. After
confirming the following window shall appear:
Содержание LX2NB
Страница 49: ...LX2NB Manual v 1 3 Page 49 57...