LX2NB Manual v.1.3
Page 12 / 57
4.
QUICK START PROCEDURE
NOTE :
Do not insert SIM card before the first programming of transmitter as it
may block the card if PIN code is required for the card.
This chapter is purposed for users that possess experience regarding GPRS
data transmission systems and who work with OSM.2007 receiver for
monitoring system. Other users shall skip this chapter and go to chapter 5
of this Manual.
As many users possess protected facilities spread at vast locations, local
programming of transmitter is not always available (with PC computer and
programming cable).
Two phases comprise programming in this option:
a)
sending to transmitter of main parameters (with SMS) that enable connection
to receiver (OSM.2007 system).
b)
full configuration of device with remote programming (GPRS transmitter
configurator and OSM. 2007).
Quick start procedure:
a)
insert into device SIM card with PIN code 1111
b)
connect power supply for module
c)
send to SIM card number with SMS parameters related to connection of
device to receiver (OSM. 2007)
d)
waiting for moment, when device indicates connection to OSM.2007
e)
complete, remote programming with GPRS transmitter configurator
Note:
Connection to receiver is possible if the device was registered into it.
Registration procedure has been described in OSM.2007 Operation Manual.
SMS text message shall provide the following information:
<transmitter’s service code>
█
SERVER=
<server address>
█
PORT=
<server port>
█
APN=
<access point name>
█
UN=
<user ID number>
█
PW=
<user password>
Where:
█
: space (every parameter shall be separated with space – blank character)
<transmitter’s
service
code>
: factory settings -
1111
<server
address>
: address of communication server purposed for collection of
transmitter signals e.g. 89.123.115.8. In case address is provided as domain e.g.
block.autostrada.com, SMS message shall include DNS1 parameter (address of main
DNS server)
<server
port>
: Number of port in server that receives messages from a device
<access
point
name>
: defines access point name to GSM network.
If private network is used, SMS message shall provide the following parameters:
UN=
<user
ID
number>
and PW=
<user
password>
.
Содержание LX2NB
Страница 49: ...LX2NB Manual v 1 3 Page 49 57...