EBS LX2NB, Инструкция по установке и программированию, Страница: 26 / 57

LX2NB Manual v.1.3 Page 26 / 57
7.1.5.2. Restricted user’s service code
Allows restricted access to the parameters of device. When restricted user’s service
code is used following groups of parameters are unavailable: Access, Transmission,
Restrictions, SMS notifications, Link control, RS232, Phone line and Dialer. Choosing
unauthorized groups of parameters in “GPRS transmitters configurator” causes error
notification.
Default restricted user’s service code:
2222
7.1.5.3. PIN of SIM card
As a device operates via GSM network, SIM card is indispensable and it may be
received from phone operator. Before the first use PIN code of SIM card shall be
programmed for operation in given transmitter. PIN code is indispensable for
automatic system launching. In case of card without PIN code, it is possible to enter
any value e.g. 0000.
If you enter wrong PIN number after inserting card and switching on transmitter,
the system will not launch and you may be able to use card after entering PUK card
only (with use of any GSM mobile phone).
Factory setting of PIN in LX transmitter is
1111 .
7.2. TRANSMISSION
For the purpose of maximum security of transmission, data is encrypted with AES
key. This option may be used for GPRS and SMS transmission.
After selection of encrypted transmission you may use your own code (256 bytes –
signs 0-9 and A-F) or use default settings.
7.3. INPUTS/OUTPUTS
Transmitter has got 2 signal inputs and additional input for sabotage signal switch-
key connection. Module is equipped with one output. In/Out option enable
programmable configuration so that transmitter operates pursuant to requirements
of the user.
All inputs of the device are 24 hour alarm inputs.