Q3
PL
26
www.eberg.eu
device will turn on
at the set time.
2. The LED display
will show "00",
use the "+" or "-,"
buttons to set the
end time from 0h
to 24h, then press
OK to confirm. The
device turns off at
the set time.
3. The default
settings are: start
- "00", stop - "00" -
the device will not
work on the day for
which the settings
are made.
5 - second
flickering
If you do not
program the
runtime within 5
seconds, the setting
mode for Monday
will exit and it
will automatically
switch to the
programming mode
for Tuesday.
Digits „2” – „7”
is flashing on
the display –
means Monday
- Sunday
The method of setting the working
time for the rest of the days of
the week is the same as for 1 -
Monday.
Remarks
1. Only one working time period
(from switching on time to
switching off time) can be set for
one day.
2. Only full on and off hours can
be set.
3. Both the switch-on and switch-
off times must be programmed.
4. Each of the seven days must
have a programmed start or end
time or a default setting that the
device will remain turned off
throughout the day. When the
settings for the last - seventh day
are completed, the weekly timer
