Q3
EN
21
www.eberg.eu
Meaning of the display symbols:
Heating mode: 1st gear
Heating mode: 2nd gear (full
power)
- When the symbol is lit constantly
- the device is working in the Set
Temperature Mode. Temperature
setting range: 18-45 °C.
- When the symbol is flashing - the
open window detection function has
been activated (sudden drop in room
temperature)
:
Weekly timer
:
Louver oscillation
START / STOP button:
REMOTE CONTROL :
A detailed description of how to operate the device via a remote control
On/ Off
Press the button
- the device will be turned on, press it again - the heater
will be turned off (if the device is turned off during heating operation, the fan will
continue to run for 30 seconds).
Heating mode
Press the button
once - the heater will start heating on the first speed
(1000W), press the button twice - the heater will start heating on the second speed
(2000W), press the button three times - only the fan will work - air circulation
mode.
Timer 1 - 8h
Press the button
to start the timer. Each subsequent press of this button
will change the setting of the time remaining until the automatic shutdown of the
device by 1 hour in the range from 1h to 8h. When the device is programmed to
work in the weekly timer mode, setting the working time in the normal timer 1 - 8h
is not available.
