Eberg Q3, Руководство пользователя

Страница: 23 / 34

Q3 EN
23 www.eberg.eu
Cycle
length
Min: s
Time
Min:s
Description
00:00 -
01:00
0:00 Activate the open window detection function
01:00
-11:00
1:00 Start temperature control. The starting control
point for measuring temperature.
6:00 Temperature detection checkpoint 1 (rapid
temperature decrease detection checkpoint).
1. If the temperature at temperature
checkpoint 1 has decreased by ≤ 8 °C since
the initial temperature measurement, the unit
keeps heating and the open window detection
function is still active.
2. If the temperature at the temperature check
point 1 has decreased by > 8 °C since the initial
temperature measurement, the device stops
heating and enters standby mode, the open
window function is disabled. (See notes.)
3. If the temperature at temperature
checkpoint 1 (** ° C) is greater than or equal
to the initial temperature measurement, the
unit maintains heating and the window open
function remains active.
**°C - maximum detection temperature 51 °C
(see overheating protection).
11:00 Temperature detection checkpoint 2 (slow
temperature drop detection checkpoint)
1.The temperature at this point is the end of
one cycle and the beginning of the next cycle.
2. The cycle lasts 10 minutes, during which
time the temperature is tested twice - every 5
minutes.
3. At the temperature detection checkpoint
2, the testing method is the same as the
temperature detection checkpoint 1 (compare
the temperatures with the initial temperature
detection checkpoint)
Re-
marks
1. When the device stops heating, a 5-second sound
signal will sound, the fan will continue to work for 30
seconds. Then the device will go into standby mode,
the display will alternately show the value of the set
temperature and the message OF.
1.1 Press the button afor the device to resume
operation in the mode in which it operated before
being turned off. After rebooting, the open window
detection function will start a new cycle. otwartego
okna rozpocznie nowy cykl.
1.2 Naciśnij przycisk aby wyłączyć urządzenie,
urządzenie przejdzie w tryb czuwania, a na
wyświetlaczu będzie prezentowana temperatura
otoczenia.