EBARA FFJP 1,1 T, Инструкция по установке и обслуживанию

Страница: 37 / 61

ENGLISH
DFFRP CONNECTIONS
XC1
5 – 6
Connection terminals for signal, electric pump running to be connected at the DFFRP control unit.
Input characteristics: open contact N.O. without potential, 5 A 250 V.
XC1
6 – 7
Connection terminals of a remote alarm to signal the electric-pump blocking for overload, phase loss, minimum
pressure and / or lack of water in the plant or fuses FU2-FU3 intervention to link at the DFFRP unit.
Contact characteristics: open contact N.O. without potential, 5 A 250 V.
The controls do not require connection to as they are connected to safety
circuit PELV (CEIEN 60204-1).
CONNECTION TO THE MAINS IN PANEL DISTRIBUTION
L1-L2-L3 Connection terminals of the switch QS1 which connect the supply line of the control panel.
ATTENTION! Execute the correct and safe connection of the cable
.
PUMP CONNECTION
U-V-W
Connection cable of the electric pump P1.
Strictly respect the correspondence expected and check the correct direction of rotation
of the motor.
37