6
InstALLAtIon And opErAtIon MAnUAL
25-13400-C May 2019 www.eaton.com
2. Unpacking the Unit
2. Unpacking the Unit
Remove the VoCALL 5 EVCS unit from its packing, and check the contents against
the following:
1. VoCALL 5 EVCS unit
2. Quick Start Guide
3. Accessory pack with the following contents:-
a. Spare mains fuse
b. 5x 3K9 0.6W end of line resistors (fitted to line sockets)
Verify the following items are present:
1. 5x Outstation Line Connectors
2. 1x 2 Way Fault Connector
3. 1x 2 Way In Use Connector
4. 1x 2 Way Access Connector
If there are any items missing please contact your supplier or
EATON Life Safety Products.
3. Removing the Cover
Using a Phillips head screwdriver, open the front cover by removing the 2 screws
along the bottom edge of the panel. Then lift the cover from the bottom edge and
push up in order to disengage the latching clips on the top edge.
Figure 1. removing the front cover