16
InstALLAtIon And opErAtIon MAnUAL
25-13400-C May 2019 www.eaton.com
8. Operation
8.3 Accepting Faults
Note the fault in the log book (available to download on line), then press the mute
buzzer key this will silence the “waterfall” tone, while the fault exists the fault buzzer
will “beep” once every 15 seconds until the fault is rectified. The buzzer will resound
on each new fault.
8.4 Panel Test
Press and hold the mute buzzer key for 5 seconds, the fault buzzer will sound and all
status LEDs will Light.
8.5 Indications and Controls
Figure 11. Indication and Controls
Indicators (Green)
Mains
Indicates healthy mains
Battery
Indicates healthy battery and charger healthy
Indicators (Yellow)
General Fault
A fault exists on the system
System Fault
Main panel fault, engineer assistance is required
Master Fault
Master handset fault
PSU Fault
Either the AC supply or DC supply is unavailable, or a fuse has ruptured
Exclamation Mark Symbol
Outstation zone fault
Indicators (Red)
Active Call
Call in progress
Zone Handset Symbol:
-
Master Calling Zone
Quick Flash
-
Zone Calling Master
Quick Flash
-
During Call
Solid
-
Holding Call
Slow Flash
VoCALL 5
