9
InstALLAtIon And opErAtIon MAnUAL
25-13400-C May 2019 www.eaton.com
4.3 Semi-Flush Bezel (EFVCC5-FB)
If the VoCALL 5 is to be fitted with the semi-flush bezel option (EFVCC5-FB), the
dimensions of the hole cut into the wall must only exceed the dimensions of the
panel by a maximum of 20mm on all sides.
The flush cover provides a 25mm border around the outside dimensions
of the panels.
For correct fitting of the semi-flush bezel, the VoCALL 5 back box should be recessed
into the wall so that the rear edges of the front plate line up with the finished
surface of the wall. The semi flush bezel will then sit flat on the wall once fitted.
Be aware that the semi-flush bezel adds a small amount of weight, and therefore
special care should be taken to ensure the fixings are adequate to support the panel.
For full dimensions see “10. Technical Specification” on page 18.
Figure 4. VoCALL 5 with EFVCC5-FB fitted. EFVCC5-FB should be
procured separately.