Quick Installation Manual with MRF
Page 18 of 24
5
Problems started after configuration changes?
Restore previous configuration
6
Is your question answered by the SHC FAQ -
check
www.eaton.eu/xcomfort
?
Provide the Smart Home Controller Issue report (contact
your supplier or the local Eaton organization)
4.3. LED Indicators on the Smart Home Controller Box
Power LED:
o
Green: Power ON, the System is operational.
o
Orange: The System is booting.
Network Connection LED:
o
Green: Remote Server Connection.
o
Orange: Internet connection. The SHC is not activated yet.
o
Red:
No Internet connection. Check your internet connection via a PC or laptop.
RF Traffic LED:
o
Blinking Green: RF traffic.
System Message LED:
o
Green: There are no new messages in the Mailbox.
o
Yellow: New Warning Message in the Mailbox.
o
Red:
New Error Messages in the Mailbox.
Battery Status LED
o
Green: All batteries are OK.
o
Yellow: At least one battery is weak. Consider to replace batteries.
o
Red:
At least one battery one battery is very weak or empty. Replace batteries.
4.4. How to restore the default admin password
This symbol indicates the recovery button on the Smart Home Controller Box.
Use a small pin to access this button.
Press the button on the Smart Home Controller for 15 seconds (power LED flashes green and
will finally change to orange), system will reboot. Wait until the LED is green. Also the network
settings will be set to DHCP.