![background image](http://html1.mh-extra.com/html/eaton/smart-home-controller-2-0/smart-home-controller-2-0_quick-installation-manual_4130713022.webp)
Quick Installation Manual with MRF
Page 22 of 24
Appendix A Activate and check for updates
A.1. Activate the Smart Home Controller
Activate the SHC for remote access and new software updates.
Admin Console navigation:
SHC Software version 1.x:
1. System -> Remote Access
SHC Software version 2.x:
1. Diagnostics -> System Status
Steps:
1. Check if there is Internet Access:
2. Click:
Activate:
3. Read and Accept the Terms And Conditions:
Accept
4. Please wait until the popup disappears.
5. Enable:
Global Remote Access
6. Refresh the page to check the connection status:
7. Please make a note of the received Remote Access ID to connect remotely
8. In case of SHC Software version 1.x: Follow next chapter to update to 2.x.
A.2. Update the SHC 1.x to 2.x
1. In case the SHC is activated and a newer SW release is available an Update button will
become visible:
a. Open Tab:
1. System ->
Firmware (SHC 1.1)
b. Be sure the Backup of the History Data and System Configuration is done
c. Click:
Update to: <version>