Eaton Powerware 9355, Инструкция по установке и эксплуатации

Страница: 68 / 100

Communication
60 Eaton 9355 UPS (20/30kVA) Installation and Operation Manual 164201626—Rev F www.eaton.com/powerquality
LanSafe Power Management Software
Each Eaton 9355 UPS ships with LanSafe Power Management Software and a communication cable. To begin
installing LanSafe software, see the instructions accompanying the Software Suite CD.
Note: Use only the supplied communication cable to connect the UPS to your computer.
LanSafe software provides up-to-date graphics of UPS power and system data and power flow. It also gives
you a complete record of critical power events, and it notifies you of important UPS or power information. If
there is a power outage and the Eaton 9355 UPS battery power becomes low, LanSafe software can
automatically shut down your computer system to protect your data before the UPS shutdown occurs.
Control Terminals
The cables should be connected to the control terminals with a mating connector. Input and output terminals
have a functional isolation from terminal to terminal. They are connected to the UPS chassis through individual
1 M

resistors.
Figure 46. External Control Terminal Connections
Note: If using a semiconductor switch type, pay attention to the proper polarity. A relay or other mechanical
control is preferred.
+ Polarity
– Polarity
2
1
+ Polarity
– Polarity
2
1
2
1
2
1
S ignal Input 1 (programmable)
S ignal Input 2 (programmable)
REPO Normally Open
REPO Normally Closed
Normally Open
Normally Closed
1
2
Common 3
Relay Output
UP S
Connectors
(see Figure 36 on
page 53)