Eaton Power Xpert Meter 4000, Быстрый старт

Страница: 7 / 30

www.eaton.com
IB02601007E
Page 7
2 Quick Start Guide for the Meter Module
2 QUICK START GUIDE FOR THE METER MODULE
2.1. Safety Precautions
All safety codes, safety standards and/or regulations must be strictly observed in the
installation, operation and maintenance of this device.
WARNINGS refer to instructions that, if not followed, can result in death or injury.
CAUTIONS refer to instructions that, if not followed, can result in equipment
damage.
WARNINGS
SHOCK HAZARDS:
IMPROPER INSTALLATION CAN CAUSE DEATH, INJURY AND/OR EQUIPMENT
DAMAGE . Follow all Warnings and Cautions. Completely read and understand the infor-
mation in this document before attempting to install or operate the equipment. Improper
wiring could cause death, injury and/or equipment damage. Only qualified personnel are
to service the Power Xpert Meter 4000/6000/8000 and Graphic Display.
TROUBLESHOOTING PROCEDURES MAY REQUIRE PROXIMITY TO EXPOSED
ENERGIZED (LIVE) ELECTRICAL WIRING AND/OR PARTS WHERE THE HAZARD OF
FATAL ELECTRIC SHOCK IS PRESENT. Exercise extreme care to avoid injury or death.
Always disconnect, lock-out and tag the current and voltage sources and the control
power supply circuit before touching the connections or components on the rear face of
the Power Xpert Meter 4000/6000/8000 and Graphic Display.
FAILURE TO GROUND THE POWER XPERT METER MAY RESULT IN DEATH, IN-
JURY OR EQUIPMENT DAMAGE. Properly ground the Meter Module during installation.
IMPROPER ASSEMBLY AND INSTALLATION OF THE CT TERMINAL BLOCK AND
STRAIN RELIEF HOOD MAY RESULT IN OPEN CIRCUITED CTS AND EXPOSURE TO
DANGEROUS VOLTAGES WHICH MAY RESULT IN SEVERE INJURY OR DEATH.
Terminal block hoods are provided with the metering current and voltage terminal blocks.
The current terminal block retaining screws are part of the matching hood assembly. The
current terminal block and hood assembly must be properly installed with retaining screws
to secure the current terminal block to the meter housing to prevent exposure to shock
hazard.