Eaton Power Xpert Meter 4000, Быстрый старт

Страница: 5 / 30

1 INTRODUCTION
Safety Precautions
All safety codes, safety standards and/or regulations must be strictly observed in the
installation, operation and maintenance of this device.
WARNINGS refer to a hazardous situation which, if not avoided, could result in death or
serious injury.
CAUTIONS refer to a hazardous situation which, if not avoided, could result in equipment
damage.
WARNINGS
SHOCK HAZARDS:
IMPROPER INSTALLATION CAN CAUSE DEATH, INJURY AND/OR EQUIPMENT
DAMAGE . Follow all Warnings and Cautions. Completely read and understand the infor-
mation in this document before attempting to install or operate the equipment. Improper
wiring could cause death, injury and/or equipment damage. Only qualified personnel are
to service the Power Xpert
®
Meter.
TROUBLESHOOTING PROCEDURES MAY REQUIRE PROXIMITY TO EXPOSED
ENERGIZED (LIVE) ELECTRICAL WIRING AND/OR PARTS WHERE THE HAZARD OF
FATAL ELECTRIC SHOCK IS PRESENT.
Exercise extreme care to avoid injury or death. Always disconnect, lock-out and tag the
current and voltage sources and the control power supply circuit before touching the con-
nections or components on the rear face of the meter base unit.
FAILURE TO GROUND THE POWER XPERT
®
METER MAY RESULT IN INJURY, DEATH
OR EQUIPMENT DAMAGE.
Properly ground the Power Xpert
®
Meter during installation.
www.eaton.com
IB02601007E
Page 5
1 Introduction