6
Green Motion EV smart breaker chargers
EV DIRECT CONNECT AND JUNCTION BOX KITS
www.eaton.com
LED indicator descriptions
1.
Not a valid J1772 State, the EV smart breaker charger will commence charging when prompted to through the EV smart breaker charger
application.
2.
J1772 State D, the ventilation required state, is not supported and will cause the EV smart breaker charger to enter the fault state.
3.
Cold Load Timeout: Following a complete loss of power during an active charging session, a phenomenon occurs called Cold Load Timeout.
When power is restored, there may be a 2–5 minute delay to resume charging per SAE J2894.
State
Blink Type
Color
Idle / Ready
No Blink
EV connector
EV pole only
Heartbeat
EV charger heartbeat
No Blink
Medium
Long
Short
Vehicle connected
Vehicle connected, EVSE ready
Vehicle charging state, EVSE not ready
(1)
Charging
Medium
Long
Loss of line power
Fault
(2)
Long
No Blink
Medium
Vehicle connected
J1772 State D
(2)
Cold Load Timeout Active
(3)
EV connector
EV smart breaker charger
EV pole
