![background image](http://html1.mh-extra.com/html/eaton/esr5-nv3-30/esr5-nv3-30_manual_4017476023.webp)
8 Operating modes
ESR5-NV3-30
12/19 MN049010EN
www.eaton.com
19
8.5 Automatic start circuit
▶
Connect S35 to A1.
The enabling current paths close automatically when the power supply is
switched on with closed emergency stop circuits.
Figure 14: Automatic start circuit
8.6 Manual start circuit
▶
Connect S34 to A1 via a button or an enabling contact or use a PLC out-
put for control.
Monitoring of input S34 prevents the enabling current paths from closing in
the following situations:
•
Digital input S34 at HIGH level when switching on the power supply.
•
Digital input S34 does not switch to LOW level on demand and before
the set delay time has elapsed.
•
Digital input S34 at HIGH level when closing the emergency stop cir-
cuits.
•
Manual and automatic start circuit simultaneously at HIGH level.
Figure 15: Manual start circuit
→
After the emergency stop, the enabling current paths close
automatically when the emergency stop circuits are closed.
This also applies if the emergency stop circuits are closed
before the delay time has elapsed.
A1 S35 S34 A2
A1 S35 S34 A2
K5 ext.
K6 ext.
24V
24V
A1 S35 S34 A2
K5 ext.
K6 ext.
A1 S35 S34 A2
24V
24V
Содержание ESR5-NV3-30
Страница 1: ...Manual ESR5 NV3 30 Safety relay 12 19 MN049010EN...
Страница 4: ......