Eaton ePDU G3 Скачать руководство пользователя страница 122

Страница: 122 / 148

Web Interface Operation

Eaton ePDU G3 Operation Manual P-164000277—Rev 5

113

Select the LDAP Server Type, User Search Bind, and Authorization Mode values from the drop-down list:

LDAP Server Type

: Allows you to select a configuration.

Active Directory:

Allows to configure a typical AD configuration. Some fields are read-only (User

Object and User Attribute are disabled).

Other

: All fields are editable.

User Search Bind

: Defines if a special user for the LDAP searches must be used.

Anonymous Search

: Search bind uses an anonymous way (Search User and Password are disabled)

User bind Search:

Uses an LDAP user.

Search User

: DN (if Bind Type = simple) or the username (if Bind Type = MD5) of the LDAP user

allowed to search in the LDAP dictionary.

Password:

Password of the Search User.

User Base DN

: Entry of the LDAP dictionary where to start the user search.

User Object

: Object class of the LDAP users.

User Attribute:

Authorization Mode

: Choose authorization by user attribute or by group.

By User attribute

: Stores the group name in the user attribute (Group Name Attribute).

By Group

: Stores the group name in the group LDAP object (UPS Group Base DN).

PDU Group Base DN

: LDAP dictionary entry from which the group search starts.

Group Name Attribute

: LDAP attribute that stores the group name.

User Name Attribute

: LDAP attribute that stores the users names linked to this group.

The resulting required field entries are active and highlighted. Type the associated values in the active
entry boxes.

Click

Save

Authenticate LDAP Remote User

To test the login and password and authenticate an LDAP remote user:

Access the Web interface and log in.

Under Network and Security, select LDAP. The LDAP page displays.

In the LDAP Authentication Test panel, select the following:

Login

: The login of the remote user.

Password

The password of the remote user.

Click

Test.

An authentication test is launched and a message displays on the LDAP Authentication Test

panel to indicate if the authentication was successful or unsuccessful.

Table 9 provides authentication error messages and descriptions of possible causes.

Содержание ePDU G3





















































































































































Результаты поиска

Содержание ePDU G3

Отзывы:

Бренды по названию

Популярные бренды

Eaton ePDU G3, Руководство по эксплуатации

Результаты поиска

Содержание ePDU G3

Отзывы:

Бренды по названию

Популярные бренды