43
To start a batch:
1. Enter the batch final preset as shown on page 41.
2. Reset the batch counter as explained in Pushing the Reset Button. If the
batch count value screen is displayed, it will go either to zero or to the batch
final preset value.
3. Press the
Start
key,
Start
PGM
Durant
the display will show the start prompt for three seconds.
If the unit has not been reset since the last batch was delivered, one of the
following error messages will appear -
, or
, or
.
Reset the batch count and try again. If the batch final preset has been set to
zero, the following error message will appear -
. Enter a batch final
preset other than zero and try again.
4. Press the
View
Enter
key before the start prompt times out,
View
Enter
Durant
the display will show StArt for two seconds, and the indicating LED will flash.
RUN MODE cont.