Eaton DS-206S series Скачать руководство пользователя | Manualshive

Страница: 83 / 96

background image

73

Instruction Booklet

IB 33-790-1J

Effective November 2010

Instructions for Low Voltage Power

Circuit Breakers Types DS and DSL

EaToN CorPoraTIoN www.eaton.com

Section 10 - Fixed Breakers

10.0 GENERAL
Fixed Breakers differ from the drawout version in that
they do not have levering device, primary disconnects
and secondary disconnects. They do have padlock fea-
ture to hold the breaker in “trip-free” position. Key inter-
lock mounted in the location of levering device may also
be supplied to insure proper sequence of operation
between two or more breakers. This insures that before

the interlock key can be removed to be used in another
location the circuit breaker must be opened and held in
trip-free position. The breaker stabs have holes for bolt-
ing to the bus connections. Terminal blocks mounted at
the back of the breaker are used as secondary contacts.
The frame is modified so that the breaker can be
mounted on the panel.

Section 11 - Drawout Dummy Elements

11.0 GENERAL
A dummy element consists of a drawout frame or truck
with disconnecting contacts and with connecting links
between the upper and lower terminals on each pole.
When inserted into a compartment it bridges the upper
and lower stationary disconnecting contacts in each
phase, and is thus equivalent to an isolating disconnect-
ing switch.
It must be emphasized that a dummy is not a breaker,
and has no current breaking ability whatsoever; there-

fore, it is almost invariably key interlocked with a breaker
or other load interrupting device, to insure that it will be
isolated or at least carrying NO current before it can be
levered out to the disconnected positions.
Dummy element requires the same size compartments
as those of equivalent type DS breakers of the same
frame sizes. The key interlock is of the same type and
operates in the same manner as that described in Sec-
tion 9 for type DS-3200 and DS-4000 drawout fuse
trucks.

«
...
81
82
83
84
85
...
»

Содержание DS-206S series

































































































Отзывы:

Нет отзывов

Похожие инструкции для DS-206S series

Бренд: nader Страницы: 13

Бренд: Eaton Страницы: 2

Бренд: Siemens Страницы: 4

Бренд: ITE Страницы: 20

Бренд: HT Страницы: 100

Бренд: Siemens Страницы: 676

Бренд: Eaton Страницы: 2

Бренд: National Instruments Страницы: 2

Бренд: Eaton Страницы: 2

Бренд: Eaton Страницы: 2

EU5E-SWD Series

Бренд: Eaton Страницы: 2

Бренд: Klockner Moeller Страницы: 6

Бренд: Klockner Moeller Страницы: 6

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды