![background image](http://html1.mh-extra.com/html/eaton/digitrip-3000-series/digitrip-3000-series_installation-operation-and-maintenance-instructions_3888980072.webp)
Instruction Leaflet
DT3000
Page 68
Effective: Date 07/02
I.B. 17555D
For more information visit:
www.cutler-hammer.eaton.com
Supersedes I.B. 17555C dated November 1999
compressed position. The device can now be secured in
the enclosure by inserting a utility locking ring in the
provided slot.
A6.2 REMOVING THE RELAY
REMOVAL OF THE DIGITRIP 3001 INNER
CHASSIS FROM THE DRAWOUT OUTER CASE
EXPOSES LIVE PARTS, WHERE THE HAZARD OF
A FATAL ELECTRIC SHOCK IS PRESENT.
ALWAYS DISCONNECT ANY CONTROL OR
SOURCE POWER BEFORE TOUCHING ANYTHING
ON THE INTERNAL OR EXTERNAL PARTS OF
THE DRAWOUT OUTER CASE.
When removing the Inner Chassis from the Drawout Outer
Case, first remove any locking ring that has been installed.
Press the top and bottom quick release buttons
simultaneously, and pull the relay out by its front panel.
WARNING