![background image](http://html1.mh-extra.com/html/eaton/digitrip-3000-series/digitrip-3000-series_installation-operation-and-maintenance-instructions_3888980013.webp)
DT3000
Instruction Leaflet
I.B. 17555D
Effective: Date 07/02
Page 9
For more information visit:
www.cutler-hammer.eaton.com
Supersedes I.B. 17555C dated November 1999
Ground Inverse Time Overcurrent Time Multiplier:
The available time settings, shown below, depend on the ground curve
shape setting selected. For the thermal curves, the settings represent relay operating times at a current value equal to 3 times
(I
n
). For ANSI and IEC curves, the settings represent the relay’s time multiplier for the current value equal to I/I
pu
.
Ground Element Inverse Time Overcurrent Time Multiplier
Available Settings
Tolerance
Curve #
Curve = IT, I2T, I4T:
0.20, 0.25, 0.30, 0.35, 0.40, 0.45, 0.50, 0.55, 0.60, 0.65, 0.70, 0.75,
0.80, 0.85, 0.90, 0.95, 1.00, 1.25, 1.50, 1.75, 2.00, 2.25, 2.50, 2.75,
3.00, 3.50, 4.00, 4.50, 5.00, 5.50, 6.00, 6.50, 7.00, 7.50, 8.00, 8.50,
9.00, 10.0, 12.5, 15.0, 17.5, 20.0, 22.5, 25.0, 27.5, 30.0, 35.0, 40.0
Curve = FLAT:
0.20, 0.25, 0.30, 0.35, 0.40, 0.45, 0.50, 0.55, 0.60, 0.65, 0.70, 0.75,
0.80, 0.85, 0.90, 0.95, 1.00, 1.25, 1.50, 1.75, 2.00
Curve = ANSI MOD, VERY, XTRM:
0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, 1.0, 1.1, 1.2, 1.3, 1.4, 1.5,
1.6, 1.7, 1.8, 1.9, 2.0, 2.1, 2.2, 2.3, 2.4, 2.5, 2.6, 2.7, 2.8, 2.9, 3.0,
3.1, 3.2, 3.3, 3.4, 3.5, 3.6, 3.7, 3.8, 3.9, 4.0, 4.1, 4.2, 4.3, 4.4, 4.5,
4.6, 4.7, 4.8, 4.9, 5.0
Curve = IECA, IECB, IECC, IECD:
0.025, 0.050, 0.075, 0.100, 0.125, 0.150, 0.175, 0.200, 0.225,
0.250, 0.275, 0.300, 0.325, 0.350, 0.375, 0.400, 0.425, 0.450,
0.475, 0.500, 0.525, 0.550, 0.575, 0.600, 0.625, 0.650, 0.675,
0.700, 0.725, 0.750, 0.775, 0.800, 0.825, 0.850, 0.875, 0.900,
0.925, 0.950, 0.975, 1.00
±10%
See Notes 1, 2 &
5
±0.05 seconds
±10%
See Notes 1, 2 &
4
±10%
See Notes 1, 2, 3
& 4
IT SC-5401-92B
I2T SC-5400-92B
I4T SC-5399-92B
FLAT
SC-5402-92B
MOD SC-6685-96
VERY SC-6686-96
XTRM SC-6687-96
IECA SC-6688-96
IECB SC-6689-96
IECC SC-6690-96
IECD SC-6691 -96
NOTES:
1.
Curves go to constant operating time above 30 X In.
2.
Tolerance: ± 10% or 0.09 seconds, whichever is larger (>1.5 x I
pu
). Minimum trip time is 2 power line cycles.
3.
For IECD, the Time Multiplier Tolerance is ±0.05 seconds.
4.
For Ground Pickup
≤
0.2pu: trip time tolerance is ±15%.
Ground Short Delay Pickup:
The available pickup settings, shown below, range from 0.100 to 11 times (I
n
) or NONE. If
NONE is selected, the short delay protective function is disabled.
Ground Element Short Delay Pickup
Available Settings
Tolerance
Curve #
0.100, 0.125, 0.150, 0.175, 0.200, 0.225, 0.250, 0.275, 0.300,
0.350, 0.400, 0.450, 0.500, 0.550, 0.600, 0.650, 0.700, 0.750,
0.800, 0.850, 0.900, 0.950, 1.00, 1.25, 1.50, 1.75, 2.00, 2.25, 2.50,
2.75, 3.00, 3.50, 4.00, 4.50, 5.00, 5.50, 6.00, 6.50, 7.00, 7.50, 8.00,
8.50, 9.00, 9.50, 10.0, 11.0, NONE
+ 10%
SC-5403-92B
Ground Short Delay Time:
The available time settings, shown below, range from 0.05 to 1.5 seconds at currents equal to or
above the short delay pickup setting selected. If NONE was selected for the Phase Short Delay Pickup Setting, the relay will
bypass requesting the time setting.
Ground Element Short Delay Time (in seconds)
Available Settings
Tolerance
Curve #
0.05, 0.10, 0.15, 0.20, 0.25, 0.30, 0.35, 0.40, 0.45, 0.50, 0.55, 0.60,
0.65, 0.70, 0.75, 0.80, 0.85, 0.90, 0.95, 1.00, 1.25, 1.50
+ 0.05 seconds
SC-5403-92B