Eaton Cutler-Hammer IQ 300 Series Скачать руководство пользователя страница 64 | Manualshive

Страница: 64 / 88

background image

IL17574C

Page 4-26

Effective Date: 2/04

IQ 300

Page 4-26

Effective Date: 2/04

For more information visit:

www.cutler-hammer.eaton.com

When the desired choice is displayed, press Enter to lock in the selection.
When Download OK appears briefly the messages to the outputs will be sent. The
display then returns to the previous screen.

4.10.13 Exit

Pressing Enter when the EXIT SMENU option appears returns the display to the
Main Menu.

4.11

RESET VALUES

These menu items allow the user to reset to zero or to default IQ 300 system values
and parameters.
Scroll up or down the Main Menu options, when you reach the VALUE screen press
the Enter button. The screens, in figure 4.42 on the next page, displays the Reset
Values choices.
Every choice can be displayed by using the Scroll arrows. If Reset ALL Min/Max is
chosen, all the Min/Max values (Amps, Volts, Power, Freq, PF) will be reset.
Press the Enter button once you reach the screen for the item you want to reset. A
new screen will appear asking if you are sure you want to reset the value(s).
To change the selection to Yes, press either of the Scroll arrows to toggle between Y
(yes) and N (no). When Y is displayed, press Enter to lock in the selection. If the
procedure completes successfully, Download OK appears briefly. The display then
returns to the previous screen.
Pressing Enter while N is displayed returns you to the Reset Selection screen. An
error message will appear if the unit is in LOCKED mode and the Enter button is
pressed while Y is displayed.

4.12

CONTRAST ADJUST

To adjust the contrast of the display screen scroll up or down the main menu to you
reach the DISP SETIN option, press the Enter button. Scroll up or down again until
you reach the CONTRAST screen, press the Enter button. When ADJ appears
above CONTRAST you are able to adjust the contrast setting. Hold the up or down
arrow until you reach your desired contrast setting, then press the Enter button. If
the procedure completes successfully, Download OK appears briefly. The display
then returns to the previous screen.
Alternatively, the contrast of the screen can be adjusted without entering the
Contrast Adjust menu by holding in the Enter button while pressing the Scroll up
arrow (to decrease contrast) or the Scroll down arrow (to increase contrast).

4.13

SCROLL MODE

The IQ 300 also has the ability to scroll through every data item while the unit is not
in use. To select this Scroll Mode option use the up or down arrow to scroll through

«
...
62
63
64
65
66
...
»

Содержание Cutler-Hammer IQ 300 Series

























































































Отзывы:

Нет отзывов

Похожие инструкции для Cutler-Hammer IQ 300 Series

Mentor Visual iQ

Бренд: GE Страницы: 2

Бренд: Badger Meter Страницы: 12

Бренд: Badger Meter Страницы: 16

Бренд: Badger Meter Страницы: 56

ModMAG M Series

Бренд: Badger Meter Страницы: 4

Бренд: Omega Страницы: 24

Бренд: Teledyne Analytical Instruments Страницы: 107

Бренд: Ecolab Страницы: 95

Бренд: ELGO Electronic Страницы: 24

OPERA CONTROL CENTER SERVER - V 3.5

Бренд: OPTICOM Страницы: 21

Бренд: Keithley Страницы: 338

Бренд: AXE Страницы: 5

VACTEST GCD 200

Бренд: BUSCH Страницы: 12

MarMonix MSL-765

Бренд: Farnell Страницы: 15

Бренд: Shimadzu Страницы: 22

Бренд: Charder Страницы: 12

WIDE ANGLE CONVERSION PORT 2

Бренд: Nauticam Страницы: 12

Бренд: Zensol Страницы: 12

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды