![background image](http://html1.mh-extra.com/html/eaton/cutler-hammer-d64rp14-series/cutler-hammer-d64rp14-series_instruction-manual_3857755013.webp)
PUB 51079
D64RP14 SERIES A2 DIGITAL GROUND FAULT RELAY
Revision 1
May, 2005
Page 13
EN 61000-6-2
Electromagnetic compatibility (EMC) - Part 6-2 Generic standards–
Immunity standard for industrial environments (note: = highest levels):
80-1000 MHz with 80% AM modulation up to 10 V/m at 3m distance from
source
EN 61000-4-2
Electromagnetic compatibility (EMC) for industrial-process measurement
and control equipment – Part 4-2: Electrostatic discharge (ESD) immunity
EN 61000-4-3
Electromagnetic compatibility (EMC) for industrial-process measurement
and control equipment – Part 4-3: Radiated electromagnetic field immunity
EN 61000-4-4
Electromagnetic compatibility (EMC) for industrial-process measurement
and control equipment – Part 4-4: Electrical fast transient/burst immunity
EN 61000-4-5
Electromagnetic compatibility (EMC) for industrial-process measurement
and control equipment – Part 4-5: Surge immunity
EN 61000-4-6
Electromagnetic compatibility (EMC) for industrial-process measurement
and control equipment – Part 4-6: Conducted radio frequency field
immunity
EN 61000-4-11
Electromagnetic compatibility (EMC) for industrial-process measurement
and control equipment – Part 4-11: Voltage dips/drops/variations immunity
EN 60947-5-1
Low-voltage switchgear and controlgear – Part 5-1: Control circuit devices
and switching elements – Electromechanical control circuit devices
IEC 60755
General requirements for residual current operated protective devices
UL
UL 1053 Ground-Fault Sensing and Relaying Equipment, Class 1
UL File E195341
CSA
C22.2 No. 144-M91 Ground Fault Circuit Interrupters
CSA File 700103
CE
CE mark – Declaration of Conformity
External Current Transformer (when required)
Use Eaton’s Cutler-Hammer C311CT series with 500:1 ratio, listed in section 4 – Catalog
Numbers.