![background image](http://html1.mh-extra.com/html/eaton/cooper-power-system-lcr-6600-rfn/cooper-power-system-lcr-6600-rfn_instructional-leaflet_3965614011.webp)
Eaton’s Cooper Power Systems
11
CT-Y0-0557
!
SAFETY
FOR LIFE
LCR 6600 RFN LEDs
LCR LEDs
The LCR LEDs have the following meanings:
Load Status (Red)
•
LED Off
– LED is off when the load is not being
controlled.
•
LED On
– LED is on when the relay is activated
and the load is being controlled.
Power (Green)
•
LED On
– LED is on during normal operation to
indicate that the unit is receiving power.
•
LED Off
– LED is off when that the unit is not
receiving power.
RF SelectCom LEDs
The two RF SelectCom Module LEDs have the
following meanings:
Status (Blue)
•
LED On During Startup
– LED is on solid for 30
seconds during startup, then it turns off.
•
LED On
– LED is on solid when an RF radio
message is being transmitted or received in a
connection.
NOTE:
The blue LED is not illuminated when a
broadcast message is being received
.
Status (Green)
•
LED Off
– LED is off when the RF SelectCom
module has lost power or when the RF SelectCom
firmware has malfunctioned.
•
LED On
– LED is on solid when the RF SelectCom
firmware has malfunctioned.
•
LED Blinking
– LED blinks (1/2 second on and 1/2
second off) when the RF SelectCom module has
power and it is functioning normally.