14
Accessories
INSTALLATION AND OPERATION INSTRUCTIONS
MN280103EN March 2023 www.eaton.com
CAUTION
EQUIPMENT MISOPERATION. DO NOT CONNECT THIS CONTROL
TO AN ENERGIZED RECLOSER UNTIL ALL CONTROL SETTINGS
HAVE BEEN PROPERLY PROGRAMMED AND VERIFIED. REFER
TO THE PROGRAMMING INFORMATION FOR THIS CONTROL.
FAILURE TO COMPLY CAN RESULT IN CONTROL AND RECLOSER
MISOPERATION, EQUIPMENT DAMAGE, AND PERSONAL INJURY.
Make appropriate electrical connections to the terminals of
the reclosers. Energize reclosers and confirm the voltage
outputs in the control.
CAUTION
HAZARDOUS VOLTAGE. DO NOT TOUCH THE RECEPTACLE
CONNECTIONS OF THE CONTROL/VOLTAGE-SENSING CABLE.
IF THE RECLOSER IS ENERGIZED AND THE CONTROL/VOLTAGE-
SENSING CABLE IS DISCONNECTED FROM THE RECLOSER OR THE
CONTROL, A VOLTAGE CLAMPED AT 250 VAC WILL BE PRESENT AT
THE RECEPTACLE. CONTACT WITH THIS VOLTAGE CAN RESULT IN
PERSONAL INJURY.
Voltage-sensing outputs are maintained at 8 V maximum
when the recloser is energized, though system faults or
improper grounding may lead to higher voltages present.
Current sensing outputs are clamped at 250 Vac when the
control cable is disconnected. Do not touch the female
receptacle connections of the control/voltage-sensing cable.
Figure 12 . Form 7 system configuration screen representation for a 15 kV system
