22
7 Common operation of the web screens
Installation and Operating Instructions Web-Controller
40071860236 (E) February 2019 www.eaton.com
7 .12 General device settings
On the General tab
2
in
the configuration menu
1
the desired country
language can be set via the
drop down menu
3
.
It is also possible to modify
or define the password
4
for 2 access accounts to
set the date and time set-
tings of the Web-
Controller
5
.
To modify the passwords
4
the corresponding account
is selected. Firstly the old
password must be set. The
new password is then saved
via “Save” after it has been
input a second time.
In the network configura-
tion page
1
it is possible
to configure all necessary
network settings. The basic
IP settings are already
described in the manual for
first commissioning.
For tests to be implemented at the correct times and to ensure that the inspection book entries
are chronologically correct, it is necessary after the commissioning to correctly set the date and
2
1
4
5
3
7 .13 Network (settings)
Follwing settings are possible:
n
DHCP: (Dynamic Host Control Protocol) if a DHCP is in
the network available, it is possible to activate DHCP.
During booting the device will get an IP-address from the
DHCP server. Please note: The assigned IP address must
be known, to open the website of the Web-
Controller!
n
Local host name: Any identification name of the Controller
n
IP address: IP address in IPV4 format xxx.xxx.xxx.xxx, nor-
mally provide by the IT-department, factory default is
192.168.1.200
n
Subnet mask: Normally provide by the IT-department, fac-
tory default is 255.255.255.0 (Class C)
n
Gateway: Gateway address to communicate to other
subnets, normally provide by the IT-department, factory
default is 192.168.1.1
n
Primary DNS (Domain Name System): Normally provide
by the IT-department. DNS provides a name resolution for
network devices.
n
Secondary DNS: Second DNS
n
MAC-address of the Web-Controller: Fixed identifi-
cation no. of the web-controller in a network.
1
