8
Warning: Please pay attention to the rated voltage of the machines, and do not use
the voltage of power supply by mistake!
Ⅶ
. Unpacking & Installation of the Machine
A. Open the Packing Box of the Stand (See Figure 3)
( Figure 3)
1. Right support board of the stand 2. Left support board of the stand 3. Cross
beams of the stand
Open the packing box and take out the support boards and the beam.
B. Mount the Stand (See Figure 4)
1) Take out the stand and mount it in the steps as shown in Figure 4.
2) Fasten the right and left supports tightly and properly with the beams,
using the screws.
( Figure 4)
1. fastening screws 2. Left support board 3. Support beams 4. Right support
board
