7
Ready indicator is on.
·
For the Single / Double Roller Heat-up Key, when you press Single, the top roller
will be heated up. And when Double, both the top and bottom rollers will be heated
up at the same time.
·
The Temperature-regulating Knob is used to set the temperature of the rollers.
·
The Speed-regulating Knob is used to control the speed of the rollers.
·
The Forward / Reverse Key is used to change the rotation directions.
·
When the key is at ‘Intermittent’, the rotation of the machine can be controlled by
the pedal switch.
Please note:
When continuous running is stopped by the protective photo-electric eye, please don’t
try to re-start the machine within 5 seconds, for the motor can’t resume running again.
After 5 seconds have passed, put the key to Intermittent first, then turn back to
Continuous, you can make the rollers run continuously.
VI. Major Technical Parameters
Model
Max. width of film
1180mm
EM-1650DH
Max. thickness of Lamination
25mm
1650mm
Range of Speed-regulation
0.1～3.9m/min
25mm
Range of Temp.-regulation
30℃°～130℃
0.1～3.9m/min
Rated voltage and Frequency
230V
30℃°～130℃
Max. rated in-put power
3950W
400V
Rated in-put power for Cold Mounting
150W
5150W
Rated in-put power for Single Roller Heat-up
2050W
150W
Rated in-put power for Double Roller Heat-up
3950W
2650W
Max. rated work current
17.5A
5150W
Rated work current for Cold Mounting
0.7A
13.2A
Max. rated work current for Single Heat-up
9.5A
0.7A
Max. rated work current for Double Heat-up
17.5A
7.5A
Dimension of the whole machine
1700X785X1265
13.2A
Dimension of the stand
1625X522X472
2170X785X1265
Weight of the machine
2095X522X472
Weight of the stand
Weight during transportation
