3
Ⅲ
. Safety Points for Attention
·
Please ensure that the voltages of power supply you are using match
the rated working voltages before operations.
Please use the power supply
matching the rated voltage. Do not misuse other incorrect power supply.
·
The electric wire should be connected with the air-brake
switch with a rated current ≥20A.
·
The power supply source should be close to the machine for convenient use.
·
The electric wire s and parts should meet the power requirements.
·
The
power supply
should have reliable
earth wire.
·
No other person is allowed to touch the motor or other rotating parts except
the operator of this machine.
·
Please don’t use damaged wires or sockets. And don’t put heavy hard object
on the wires.
·
If abnormal conditions occur,
please switch off the power supply first.
·
As the machines have a heating-up system, please don’t touch the
surface of the rollers, in case it will cause burns on your skin.
·
When the film, picture and text or guide paper are fed in between the
two
rubber rollers,
please operate at a lower speed with the pedal switch.
·
Keep rigid
objects
away from the surfaces of rubber rollers
during operation
,
otherwise the surfaces of rubber rollers may be damaged or other mechanical
faults may be caused, which will affect the quality of laminating directly.
·
During the
operation
, please take care that no clothes, neckties, hairs,
necklaces and cuffs will be rolled into the machine, in case body injuries,
surface damages of rubber rollers or other damages may be caused.
·
During the laminating
operation
, please don’t
put anything but
laminating
materials
on the working panels and the cabinets on the two sides so as to
avoid accidental involvements, which will cause damages to the surface of
rubber rollers or to the machine.
·
This machine can’t
mount metal
materials or other hard objects.
