Easy KAW Series, Руководство пользователя

Страница: 25 / 37

25
KAW
Section 3
Processing & Parameters
Mixer

Mic Direct Level (0% to 100%) - This parameter sets microphone direct level.

Music Level (0% to 100%) - This parameter sets music level.

Reverb Level (0% to 100%) - This parameter sets reverb level.

Echo Level (0% to 100%) - This parameter sets echo level.
Compressor

Comp TH (-50dB to 0dB)
Threshold sets the signal level at which the Compressor starts to work. If the threshold level is set at -10
dB, only signals that pass above -10dB will be compressed; signals below the level will not be compressed.

Comp Ratio (1:2 to 1:100)
This parameter is the amount the unit compresses the signal level and indicates the difference between the
signal increase before compression and the increase at the output level. A 2:1 ratio means if the incoming
signal is 2 dB above threshold, the output signal after compression is 1 dB above threshold.

Comp Attack (1ms to 90ms)
This parameter defines the time it takes for the Compressor to start compressing when threshold is reached.

Comp Release (0.1s to 2.5s)
This parameter defines the time it takes for the Compressor to stop after the signal dips below threshold.

Compression Bypass (On/Off)
This option when turned on will set all the Compressions for that output off like it is flat.
Xover/Crossover

LPF (20 to 20000Hz)

LP Type (By pass, Bessel 12dB/18dB/24dB, Butter 12dB/18dB/24dB, Link Riley 24dB)

HPF (20 to 20000Hz)

HP Type (By pass, Bessel 12dB/18dB/24dB, Butter 12dB/18dB/24dB, Link Riley 24dB)
Auto Sing/Dance Mode

Auto Sing/Dance mode is used to switch between using the system in a dance environment (Dance Mode) or
for karaoke use (Sing Mode). When Sing Mode is turned on, the subwoofer can be reduced for karaoke use.
When Dance Mode is turned on, the subwoofer can be enhanced for dance club use. This feature makes it
very easy to use the live sound system for both purposes.
Sing/Dance Mode can either be engaged manually or automatically. The Sing Mode Timer allows you to
automatically decrease ultralow frequency output after a period when the microphones are not used.
DANCE MICROPHONE THRESHOLD AND DANCE MICROPHONE TIME MUST BE SET IN
SYSTEM SETTINGS PAGE.