Easy KAW Series, Руководство пользователя

Страница: 19 / 37

19
KAW
Section 3
Processing & Parameters
3.2.2 Microphone Parameters
Click on Mic tab to tune the parameters.
Mic is the control of the microphone inputs and parameters.
Mic Parameters

Mic EQ (10 Bands - 63Hz, 125Hz, 250Hz, 500Hz, 1KHz, 2KHz, 4KHz, 6.3KHz, 8KHz, 16KHz)

Mic A Vol Vol (0 to 100)

Mic B Vol Vol (0 to 100)

Mic FBX (0 to 4)
The FBE/FBX Feedback Elimination function was designed to provide an excellent feedback elimination
processing, all of these feedback detection and suppression is done be FBE/FBX automatically completely.
With FBE/FBX, the feedback is removed automatically to keep a good and live sound after suppression.

Noise Gate (OFF; -90dB to -50dB)

Comp TH (-50dB to 0dB)
Threshold sets the signal level at which the Compressor starts to work. If the threshold level is set at -10
dB, only signals that pass above -10dB will be compressed; signals below the level will not be compressed.

Comp Ratio (1:2 to 1:100)
This parameter is the amount the unit compresses the signal level and indicates the difference between the
signal increase before compression and the increase at the output level. A 2:1 ratio means if the incoming
signal is 2 dB above threshold, the output signal after compression is 1 dB above threshold.

Comp Attack (1ms to 90ms)
This parameter defines the time it takes for the Compressor to start compressing when threshold is reached.

Comp Release (0.1s to 2.5s)
This parameter defines the time it takes for the Compressor to stop after the signal dips below threshold.

Compression Bypass (On/Off)
This parameter turns on or off the compression algorithm.

LPF (20 to 20000Hz)

LP Type (By pass, Bessel 12dB/18dB/24dB, Butter 12dB/18dB/24dB, Link Riley 24dB)

HPF (20 to 20000Hz)

HP Type (By pass, Bessel 12dB/18dB/24dB, Butter 12dB/18dB/24dB, Link Riley 24dB)

Bass (-24dB to +24dB)

Mid (-24dB to +24dB)

Mid Freq (20 to 20000Hz)

Treble (-24dB to +24dB)