14
KAW
Section 2
Getting Started
Follow the steps below to complete the operation:
Display Panel
Battery Status
Indicates charge remaining in transmitter batteries.
Channel Number
Indicates the channel number
Reception Level
Indicated the reception level between the transmitter and
receiver.
On/Off Button
Press to turn on or hold to turn off
Note:
The handheld transmitter should be able to connect
to the receiver automatically using the default channel ID,
if not, please follow the next step for syncing.
Sync Button
Automatic Sync
After powering on the wireless microphone, press the
Sync button to change the frequency (don't let go of the
hand) and then press - the "power button" indicator light
flashes, at this time it is in the state of thousands of pairs.
After the indicator light does not flash, the code matching
is completed, and the microphone is connected to the
receiving module.
Manual Sync
After powering on the wireless microphone, press and
hold the Sync button until the frequency is blinking - press
the "power button", the indicator light is flashing, wait until
the indicator light does not flash, the ID has changed at
this time and cannot be connected to receive, then turn off
the receive. Then short press the "FM button" (don't let go
of your hand), then press the "power button", wait until the
indicator light flashes, power on the receiving module
within 3S, and the microphone can be connected to the
receiving module.
