keys to select the corresponding number of digits, then rotate the knob to adjust the value,
[Enter], [Shift] + [
▶
] (Esc) Exit editing; 5. Press [Shift] + [
▶
] (Esc) to return to the previous
interface.
Test interface operation instructions: Press the corresponding [On1], [On2] to start or
close the mode.
Fig 2.8.1 Battery Test Set Interface
Fig 2.8.2.1
Battery Test CC Interface
Fig 2.8.2.2
Battery Test CR Interface
2.9 LED Test Operation
The CR-LED test can simulate the characteristics of a real LED lamp. By increasing the
turn-on voltage setting of the diode in the conventional CR mode, when the load input
